Before answering the question " How to switch to 1C 8.3 from version 1C 8.2?", let's first understand the versions of 1C and their compatibility with each other. So, there are two main modes of operation of the 1C platform: 8.2 (regular forms) and 1C 8.3 (managed forms), in addition to the fact that the platform itself can be of different versions (8.2 and 8.3 ), and the configurations themselves can have different editions (for example, the “Enterprise Accounting” configuration is now released in two editions, edition 2.0 for the 8.2 platform which usually has the type number 2.0.хх.хх, and edition 3.0 for the 8.3 platform which usually has the type number 3.0.хх.хх), it should be noted that the edition number does not always correspond to the platform number, for example, the “Accounting of a State Institution” (BGU) configuration has two editions 1.0 and 2.0 for 1C 8.2 and 1C 8.3, respectively.
Now let's consider the following situation, if for example you have the "Enterprise Accounting Rev. 2.0" configuration installed for 1C 8.2 (regular forms).
If you want to switch to 1C 8.3, then you need to follow several steps:
- Make a backup copy of the current database
- Updating the 1C platform to 8.3
- Updating the 1C configuration to rev. which works on managed forms (1C 8.3)
Many people only carry out the first point and as a result are faced with such a situation, let's look at an example. There is a configuration “Enterprise Accounting Rev. 2.0” that needs to be transferred to 1C 8.3. A person installs a new 1C 8.3 platform, after which he launches the 1C shortcut and selects the desired database from the list, after which his old database, which was on 1C 8.2, is launched. What is the problem? The problem is that after installing the 1C 8.3 platform, our configuration “Enterprise Accounting Rev. 2.0” can be launched from under 1C 8.3, but nothing will change much, that is, you will run your configuration only under the 1C 8.3 platform, with In this case, all new features of the 1C 8.3 platform will be blocked for you; in order for all these features to be available, you need to update your configuration (in our example, “Enterprise Accounting Rev. 2.0”) to the new edition (“Enterprise Accounting Rev. 3.0”). From all this we can conclude that in order to switch from 1C 8.2 to 1C 8.3 need to be done
As the 1C company reports in official letters, from 2014 it is planned to discontinue support for the product “” 2.0. This means that 1C will stop releasing updates for this program, including regulated reporting.
The vendor recommends transferring its clients’ information systems to a new version of the program - 1C Accounting 3.0 (8.3). This program is a fully functioning full version of the program, the official release of which was released more than a year ago.
What does that require? Let's look at step-by-step instructions for updating or migrating from the 1C Accounting program from 2.0 to 3.0.
You can read more about the new version of the program on the page.
Before switching from 1C 8.2 to 8.3, you need to make sure that the correct versions of programs (configurations and platforms) are installed in the company.
Installing update templates
You must install this before updating the program. Where can I get the accounting update installation file? Subscription holders should not have any problems with this.
After downloading the update, open the archive:
Get 267 video lessons on 1C for free:
Launch the setup.exe file from the archive and click next 3 times:
The update has been unpacked!
Preparing for the update
Updating the configuration to version 3.0 possible starting from version 2.0.35.6. Users who have an earlier version of the configuration installed must first update the configuration to a version no lower than 2.0.35.6.
The new edition is supported by the platform 1C version 8.2.15 and higher.
Accounting version 3.0 is available for updating to clients who have a license for the program version 2.0 and an ITS subscription from 1C. If you need to switch from 2.0 to 3.0, contact an experienced 1C 8 programmer.
First, you need to make sure whether your configuration is typical. If you do not have support installed when you open the configuration (there is no lock on the configuration), do not try to update the configuration yourself under any circumstances, there is a risk of data loss. Talk to .
The configuration must have support installed (with a lock):
Before updating, make a backup copy of your database!
Program update
After the preparatory stage has been completed and you understand that it is possible, we will proceed to the update.
The transition to edition 3.0 is performed as an update of the configuration version using the configurator.
To do this, you need to open 1C 8.3 in configurator mode, open the configuration:
This note examines the process transition from 1C version 8.2 to 1C version 8.3 a typical enterprise accounting configuration, most likely the process described here is suitable for other configurations. In the transition to 1C version 8.3 there is nothing complicated, since the migration process is the most common update 1C 8.2 to version 1C 8.3. Advantages 1C versions 8.3 (platform 8.3, configuration 3.0) obvious - this is the ability to transfer the load from the client to the server, support " Managed forms" allowed to work in the program in thin and web client mode.
How to switch from 1C 8.2 to 1C 8.3 enterprise accounting
1. Install the technology platform 1C 8.3 how to install 1C can be read in the article -
2. Update 1С8.2, usually up to the latest version.
Go to the ITS website 1C, to the section for downloading updates for 1C Enterprise 8.3, we find in the list of updates the latest updated update for the transition from 1C 8.2 to 1C 8.3 and download it, carefully read the ReadMe file, it should contain the minimum requirements for the configuration release 8.2
to use the downloaded archive in order to update version 1C8.2 to 1C8.3.
Current configuration version 1C 8.2 you can see by running 1C Enterprise in normal mode or in configurator mode in the section Reference – About the program.
Knowing what minimum version you need to update your configuration to 8.2 download all updates sequentially using the table for updating 1С8.2 to the version we need. The first and next release numbers from which you can upgrade can be found in the table in the column Version update.
Afterwards, we update 1C 8.2 to the required configuration version.
How to update a typical configuration 1C8.2 or 1C8.3
To update the standard configuration 1C launch 1C platform, select the database that we will update and launch 1C in mode Configurator.
Go to the menu item Configuration- click, Open configuration, if it is not open at startup.
Next, go to the menu item Configuration – Support – Update configuration.
We select the configuration update source, in my case the template is installed in the default directory, so I select the item: Search for available updates (recommended), press the button Further.
Select the search area for update files: mark Search current template and update directories, remove Look for updates in catalogs on the 1C website, press Further.
Select the required update and click – Ready!
Read the description of the update and click - Continue update.
In the window New provider configuration press the button OK.
We are waiting for the supplier configuration to be updated.
The configuration has been updated. Update database configuration, press – Yes.
Accept changes in the configuration information structure – button, Accept.
After the update, go to the menu item Service – 1Enterprise, launch 1C.
Checking the legality of receiving the update - confirm that the update was received legally and click the button, Continue.
The configuration has been successfully updated.
We update consistently 1C, in the manner indicated above before receiving the desired release.
3. Set up the configuration for the transition from 1C version 8.2 to 1C version 8.3, installed in the same way as updating 1C.
In configurator mode we will create a backup copy of the data , Administration – Unload the information base and save the 1C filev8.dt.
If users are created in the configuration, then install an additional role System administrator for the transition to edition 3.0, the user under whom the update will be performed.
Let's launch Platform 1C 8.3 with version configuration 8.2
, to do this, click the change database button and specify the platform version number in the launch parameters 8.3
, in order for the platform to start 8.3
.
Let's launch 1C 8.3 in mode Configurator, then we move on - Configuration – Support – Update configuration.
The update process takes a significant amount of time; it requires more time than installing updates and depends on the size of the database.
When changing the database structure 1C Warnings may appear, it is better to read them carefully, and if we do not see any serious problems, we agree to process the changes.
After updating the configuration, run 1C in working mode, we agree with the legality of the update, and wait some more time for the program update process to complete 1C.
Enterprise accounting has been successfully updated to version 3.0 !
The above steps can be simplified; to do this, just run 1C And Service choose - Update to version 3.0 in this case, the program itself will find the required edition to switch to 1C 3.0, we just need an Internet access channel and an ITS subscription with a working login and password to access the 1C website
Currently, the transition from 1C:Enterprise 7.7 to 8.3 (similar to 8.2) has become a headache for accountants. Preferably as quickly as possible and without errors. If you are a 1C:Accounting programmer and you need to convert documents from the seventh version to the eighth, then this article is for you.
Take just a few steps and your data transfer problems will be solved. Read this instruction to the end, and you will see how to do this. First, you must prepare a workplace on your computer for the necessary manipulations. Firstly, your hard drive must be at least 100 GB. This is necessary because it is multi-level. And you will need to work with several 7.7 configurations.
If you need a quick and high-quality transition from 1C Accounting 7.7 to 1C 8.3, contact us! Our average turnkey cost is 6,600 rubles.
Transferring data from 1C 7.7 to 1C 8.3 accounting 3.0
So, before working with transferring data to version 1C 8.3, you need to prepare this data in version 7.7. To do this you must do the following. Let’s say you have a working database “Accounting for an Enterprise” on your computer, which your accountants work with. Using Export77 processing, upload all the necessary documents to a text file and from that moment on, never return to the main working database. Your further manipulations will occur with other configurations.
Install the latest Release 1C:Enterprise 7.7 into the new directory. (the package includes a standard empty version (without data) and a demo version). We will work with the standard version. Now launch this database and, using Import 77 processing, load data from your main database from a text file.
When converting data, some documents may not be processed. It's not scary. The trick is that you can easily fix this after the transfer, since in the standard database you work with the main standard chart of accounts. Therefore, no matter how sophisticated the subaccounts are, it is easy to fix this in your working database in about 3 hours by going into each unposted document and changing the accounts that you have in your configuration in the account fields.
Naturally, before the transfer, you first bring the chart of accounts of the standard configuration into line with the chart of accounts of your main working base. The options are purely individual depending on the specifics of your organization. Having done this work, you receive a standard configuration filled with data from your working database.
Now we need to do another data transfer. To do this, install the standard zero configuration again in a new directory. And transfer the data there from the standard configuration with your data. As a result, you will get an ideal version 7 database, ready for transfer to version 8.2.
The fact is that data is transferred directly to the eighth version exclusively from the “untouched” standard version 7.7. And now you have just such a configuration. But now it is not empty, but with your work data.
All! We launch 1C:Enterprise 8.2. Select “Data transfer from version 7.7.” and enjoy how the program itself transfers data from your processed 7.7., transfers documents and displays a comparative table of the balance sheet of versions 7.7 and 8.3.
Of course, there will not be a 100% result. But at 70-80 percent you will get a match. And then your work will be done only in version 8.3.
Possible inaccuracies are easily corrected. It's another 3-4 hours. You go to the document journal and either adjust the accounts or fields (for example, “Agreement” or “General cash register”). It depends on the degree of difference between your 7.7 base. from standard. As a result of all these actions, your working configuration of version 8.3 will be able to produce accounting data through the balance sheet in an ideal form.
After the transition, it will be useful for you to learn how to work in the new program. For this we have prepared a section.
By the way! If you need modification of 1C programs, you can contact us!
Video on the transition from 1s 7.7 to 8: