Calendar plan of work on WCR. Approximate work plan for WQR

Application No. 2

Ministry of Education and Science of the Russian Federation

Federal State Budgetary Educational Institution of Higher Professional Education "Ural State

Pedagogical University"

Institute of Special Education

Department of speech therapy and clinics of dysontogenesis

Topic name WRC

Final qualifying work

Yekaterinburg 2011

Application No. 3

Application No. 4

Sample design of references, list of references

Intratext i bibliographic link contains information about the object of the link, not included in the text of the document. Intratext bibliographic references are enclosed in parentheses.

Example:

(Arene V.Zh. ABC of a researcher. M.: Intermet Engineering, 2006)

(Potemkin V.K., Kazakov D.N. Social partnership: formation, evaluation, regulation. St. Petersburg, 2002. 202 p.)

Aggregate transtextual bibliographic references is drawn up as a list of bibliographic records placed after the text of the document or its component part.

An off-text bibliographic reference may contain the following elements: title; main title of the document; general designation of the material; information related to the title; information about responsibility; publication information; output; the physical characteristics of the document; information about the location of the link object in the document (if the link is to a part of the document); information about the series; designation and serial number of the volume or issue (for references to publications in multi-part or serial documents); information about the document in which the link object is published; notes; international standard number.

Example:

21. German M.Yu. Modernism: art of the first half of the 20th century. St. Petersburg: Azbuka-klassika, 2003. 480 p. (New history of art).

34. Nikonov V.I., Yakovleva V.Ya. Algorithms for successful marketing. M., 2007. S. 256-300.

When numbering off-text bibliographic references, continuous numbering is used for the entire text of the document as a whole.

For connection with the text of the document, the serial number of the bibliographic entry in the post-text reference is indicated in the reference, which is given in square brackets in the line with the text of the document.

Example:

in the text:

An abundance of reference books on terminology, covering the time no later than the middle of the 20th century, is given by the work of the bibliographer I.M. Kaufman.

59. Kaufman I. M. Terminological dictionaries: bibliography. M., 1961.

Example:

in the text:

10. Berdyaev N.A. The meaning of history. M.: Thought, 1990. 175 p.

If the text contains references to several books by the same author, then the design of the link in the text may contain an indication of the year of publication:

Example:

in the text:

[Bakhtin, 2003, p. eighteen] ;

Bakhtin M.M. The Formal Method in Literary Studies: A Critical Introduction to Social Poetics. M.: Labyrinth, 2003. 192 p.

In the reference, it is allowed to abbreviate long titles by marking the omitted words with an ellipsis, with a space before and after this prescribed sign.

Example:

in the text:

[Philosophy of culture..., p. 176]

Philosophy of Culture and Philosophy of Science: Problems and Hypotheses: Interstudy. Sat. scientific tr. /Sarat. state un-t; [ed. S.F. Martynovich]. Saratov: Sarat Publishing House. un-ta, 1999. 199 p.

A subscript bibliographic reference may contain the following elements: title; main title of the document; general designation of the material; information related to the title; information about responsibility; publication information; output; information about the volume of the document (if the link is to the entire document); information about the location of the link object in the document (if the link is to a part of the document); information about the series; designation and serial number of the volume or issue (for references to publications in multi-part or serial documents); information about the document in which the link object is published; notes; international standard number.

Example:

1 Tarasova V.I. Political history Latin America. M., 2006. S. 305.

3 Kutepov V.I., Vinogradova A.G. Art of the Middle Ages. Rostov n/D, 2006. S. 144-251.

17 History of the Russian Book Chamber, 1917-1935. M., 2006.

or in more detail:

1 Tarasova V.I. Political history of Latin America: studies for universities. -2nd ed. - M.: Prospekt, 2006. - S. 305-412.

3 Kutepov V.I., Vinogradova A.G. Art of the Middle Ages / ed. ed. IN AND. Romanova. - Rostov n / a, 2006. -S. 144-251.

17 History of the Russian Book Chamber, 1917-1935 / R.A. Aigistov [i dr.]. -M.: Ros. book. Chamber, 2006. - 447 p. - ISBN 5-901202-22-8.

For analytical records, it is allowed, if the text contains bibliographic information about the constituent part, to indicate in the subscript only information about the identifying document:

Example:

2 Adorno T.V. To the logic of social sciences // Vopr. philosophy. - 1992. - No. 10. -S. 76-86.

Example:

2 Official periodicals: electron, guide / Ros. nat. b-ka, Center for Legal Information. [St. Petersburg], 2005-2007. URL: http://www.nlr.ru/lawcenter/izd/index.html (date of access: 01/18/2007).

The list of references is designed according to the rules of the bibliographic description, presented in GOST R 7.0.5.-2008 (“Bibliographic reference. General requirements and rules for compiling”).

WRCs are often mistaken for a graduation project in higher education. educational institution. In fact, this final work is in any professional educational institution that prepares specialists for graduation. And these are colleges, and technical schools, and others are not universities, but they are no longer schools.

Definition: What is a WRC?

Final qualifying work is one of the types of final attestation tests for students who complete their studies in the main educational program of a secondary vocational institution.

To write it, you must have. But in addition to having a personal characteristic, a number of more essential requirements will also need to be met.

Such work should be carried out in accordance with the guidelines and rules for writing the WRC, as well as with the following state documents:

• with the Federal State Educational Standards for specialties and professions of secondary vocational education (secondary vocational education);
• The procedure for conducting the State final certification for educational programs SPO;
• Regulations on the State final certification of graduates of an educational institution.

What does belonging to all these documents tell us? The fact that WRC is an obligatory part of the GIA. It is she who confirms that the graduate's professional training meets all the state standards of the chosen specialty or profession. After all, it displays the student's knowledge in the chosen subject, the level of his preparedness in the profession, the ability to analyze and systematize the collected data, generalize, and solve didactic problems in specialized activities.

The purpose of the WRC

Graduate qualification work is the systematization and consolidation of the theory in a particular specialty in the course of solving practical problems in research and analysis, identifying the ability to work independently.

That is why one of the requirements for writing a WRC is not a formal, but a creative approach to choosing a topic, drawing up a plan for completing a final qualification work, as well as the order of its writing and execution.

WRC topics

Subjects are chosen according to their qualifications. It can be performed:

• in the specialty (in the form of a diploma project),
• by profession (in the form of practical WRC and written work).

According to guidelines for the implementation / writing of the final qualification work, the topic must be chosen in accordance with modern requirements for the development of science, technology, economics, production, culture, economics and other important areas of human life.

WRC tasks

Another definition says:

The final qualifying work is the final attestation research work of the student, which is carried out in the last year of study, presented in writing and meets all the requirements and guidelines for writing the WRC.

After graduating from the college, the WRC was called solve the following tasks:

• helps to check the compliance of the level and quality of the students' knowledge and their readiness to work in the specialty;
• get in-depth theoretical knowledge;
• develop skills and abilities of independent mental work;
• improve the skills of independent study of important literature (educational or professional);
• develop the skills of analysis and generalization of advanced professional experience, as well as their own experience in professional activity in the chosen specialty during the period of study;
• learn and understand the essence of the methods of conducting scientific research, develop the ability to create their own research methods.

Guidelines for the implementation of the final qualifying work - this is not the only help in its creation. The supervisor plays an important role. It will help to draw up a clear plan for the WRC implementation schedule, as well as prepare the manuscript for defense.

In addition, the leader gives a review of the WRC, comparing it with a ready-made writing sample.

Examples of writing a review for a final qualifying work can be found here:

In the review, the leader confirms that he personally familiarized himself with the content and is partially responsible for any information indicated in the work, for their accuracy and execution. Therefore, it is in his interests to approach his work as meticulously as possible: assistance in preparing the manuscript, compiling comments for correction by the student. However, the author of the work still bears full responsibility for the content.

WRC writing methodology

There is a certain methodology for completing the final qualifying work, the quality of which is primarily assessed by the commission.

So, here are the main points that you should pay attention to when preparing for the surrender.

Workload

The volume of the manuscript should not be excessively large. With a standard font of 14 pt on A4 sheets, the optimal size of the work is 50 sheets.

Of course, this is not the law, and if necessary, you can exceed the specified figure. But most likely, the extra volume will simply not be taken into account by the members of the commission (in other words, the extra sheets will not even be read).

Registration

GOSTs were created for someone to comply with them. Therefore, any student in the preparation of the WRC should be able to correctly draw it up, because compliance with the standards is the first thing the SAC members look at.

You should not hope that the supervisor or members of the SAC will not pay attention to incorrect design. There is even a paragraph in the review that evaluates the quality of the work design.

So, a neatly prepared document should be written:

• in a strict scientific style;
• clearly, logically, consistently;
• with the outlined basic materials necessary for the final work.

The main materials for the final work are the setting of goals and objectives, the argument of scientific publications on the subject, the description of the methods and stages of solving problems, the demonstration and analysis of the results obtained.

By the way! For our readers, there are now attractive discounts both on the works themselves and on the components of final works.

WRC structure

Like any other work, the WRC has a strict structure. Nothing new, standard:

• title page,
• table of contents,
• annotation,
• listing the main terms and their definitions, abbreviations with a brief explanation,
• five page introduction
• the main part (theory and practice, divided into paragraphs of 5 pages each),
• two or three page summary
• bibliographic list,
• applications.

But that is not all. Before you start working on the main work, you will definitely need additional documents:

• assignment for writing a WRC;
• a plan for writing a WRC with a listing of the dates of the planned and actual period of work on each individual part;
• review of the supervisor;

Good afternoon dear guest. In this article consider how to write a plan thesis .

The plan of qualifying work is not its content! This is a description of what actions you will take to get the job done. Approximately such a plan is then entered into the sheet of the calendar plan, which you submit along with your thesis.

Most universities use the following final work scheme:

Introduction
Part 1. Theoretical overview
Part 2. Analytical part
Part 3. Design part
Conclusion
List of used sources and literature
Applications

Each of the sections of the plan for such a diploma scheme includes up to 4-5 subsections for each part, that is, up to 12-15 points in total.

Sometimes the second and third parts are combined into one, which is called "practice". They can also break the 3rd part into two: development of activities and evaluation of the results.

What will the overall plan look like?

1. Compiling outline of the theoretical review
   1. Selection of literature
   2. Formation of the main hypothesis
   3. Preparation of a theoretical review
2. Compiling plan of the analytical part
   1. Collection of initial data about the enterprise
   2. Preparation of economic and organizational information
   3. Conducting a general analysis of the organization's activities
   4. Conducting a private analysis of the organization's activities
   5. Forming conclusions
3. Compiling design plan
   1. Development of areas for improvement
   2. Proposal for a set of events
   3. Assessment of economic feasibility and efficiency
   4. findings

So. We got 13 points (4 + 5 + 4). Actually, we write them down as a plan and bring them to the teacher. The only thing you need to do is to adapt a little to your theme.

A few words as a digression

• What is a "general analysis"? This is an analysis of the activities of the enterprise, or its financial and economic condition. That is, an analysis that allows you to assess the state and prospects of the enterprise as a whole
• What is "private analysis"? This is an analysis of the subject matter. That is, an assessment of what you have formulated in the topic.

The general analysis in all works is approximately the same. Private analysis in all works is different.

Consider drawing up a work plan using an example. Suppose you have a topic

“Improving the efficiency of a tourism enterprise (on the example of Vensky Voyage LLC)”

Then the plan for such a topic would look like this:

1. Drafting indicative content
2. Selection of literature in the field of efficiency of the tourism enterprise
3. Formation of the main hypothesis for increasing the efficiency of activities
4. Preparation of a theoretical review of the tourism industry
5. Collection of initial data about the company "Vensky Voyage" LLC
6. Drawing up an economic and organizational statement based on the initial data of Vensky Voyage LLC
7. Conducting an economic analysis of the activities of the organization "Vienna Voyage"
8. Conducting an analysis of the effectiveness of the activities of Vensky Voyage LLC
9. Formation of conclusions about the effectiveness of activities
10. Development of directions for improving the efficiency of the enterprise
11. Proposal of a set of measures to improve performance
12. Assessment of economic feasibility and effectiveness of a set of measures
13. Conclusions and recommendations

If you have any difficulties with drawing up a plan, you can always contact me for advice: vk.com/diplom35 or by mail: [email protected].

I can look at your plan and give advice just like that. The second option - you can order a plan from me. From you I will need a topic, the name of the enterprise and, if any, guidelines for the work for which the plan is needed.

Sincerely, Alexander Krylov.

Materials for final qualifying (diploma, bachelor's, master's), term papers and practice reports in economics, financial management and analysis:

• Themes of bachelor's theses of the Department of Finance and Credit of the Siberian State Aerospace University named after I.I. ak. M.F. Reeshetneva 1. Financial evaluation of effectiveness investment projects In the organisation. 2. Organization…
• The following table contains a list of exemplary thesis topics in economics, which are recommended for writing at Cherepovets State University in the direction 080502 "Economics and Management ...
• Surgut Institute of Economics, Management and Law (branch); FGBOU VPO "Tyumen State University" The subject of final qualification works in the direction 080100.62 "Economics". Profile "Economics of enterprises and organizations". For full-time students ...
• On this page - topics of final qualifying works for economists of the Tyumen State Academy of World Economy of Management and Law. Undergraduate. Approximate topics of final qualifying works on ...
• Good day. In this article - a few words about theses on business planning If you turned your attention to a topic like "creating a business plan for an enterprise ...
• How to fill in the diary of undergraduate (or industrial) practice of an economist? To fill it out, you need to follow several steps: Determine how many days the practice takes in total Put the dates in the diary ...
• Hello. In this article, we will consider the question of how to prepare the first part of a diploma in economics (thesis, master's or bachelor's thesis). You start writing the first chapter of the diploma, ...
• This article contains an example of the structure of the final qualification work (thesis / project or bachelor's / master's thesis) - from introduction to applications. Here you can download...
• Write a diploma, defend a diploma, write a diploma, how to write a diploma In this article we will discuss with you how to write a diploma on your own using the example of a thesis…
• Good day, dear reader. In this article I will talk about how to write the introduction of a thesis. The introduction is written after drawing up the plan of the thesis. After writing the introduction...

10 comments on ““How to write a thesis plan””

Hello, I really need your help. The teacher made up part of the plan and I myself did the rest. So, you can’t fill out just 2 points of the plan and evaluate what I made (maybe there is generally nonsense).
Topic: Improving Efficiency retail food products: economic and legal aspect. What the teacher compiled, I highlighted @. Thank you in advance.
Diploma Plan
@one. Theoretical and methodological foundations for improving the efficiency of retail trade.
@1.1 The concept and essence of the effectiveness of retail activities.
@1.2 Key ways to improve retail efficiency.
@1.3 Economic and legal aspect of increasing the efficiency of retail trade.
@2. Analysis of the effectiveness of the activities of IP "Parfenova"
@2.2 Analyzing organizational performance
2.3
3. Improving the efficiency of retail trade in food products IE "Parfenova"
3.1 Measures aimed at improving the efficiency of retail trade in food products in the IP "Parfenova"
3.2

• According to plan.
  I would add a paragraph like “1.4 Specifics of food retailing” to chapter 1
  Since the topic is about this, nothing is said about the specifics of food products in the first chapter.
  If the teacher sees the content of the first chapter exactly as it is now, then this specificity should be written in each subsection.
  Chapter 2 I would rename:
  2. Evaluation of the effectiveness of retail trade in food products IP Parfenova I.O.
  Please note that after the IP there should not be quotes, but there should be initials.
  In quotation marks, there can only be a company name, but it hardly looks like a surname.
  In chapter 2, there is no assessment of the subject of study, so it needs to be added. For example, like this:
  Chapter 3 I would call 3. Designing measures to improve the efficiency of food retailing
  3.1 can be left the same, then 3.2 will be "assessment of the economic indicators of the implementation of the proposed activities"
  But I usually put “3.1 Directions for Improving the Efficiency of Food Retailing” as the first item.
  Here you can list the problems and suggest directions for solutions.
  Then in 3.2 there will be concrete measures in these areas.

  • Hello again! Changed the plan a bit. Changed paragraphs 1.3 and 3.2.
    What do you think the plan is now?
    Topic: Increasing the efficiency of food retail trade: economic and legal aspect.

    1. Theoretical and methodological foundations for improving the efficiency of retail trade.
    1.1 The concept and essence of the effectiveness of retail activities.
    1.2 The main ways to improve the efficiency of retail trade.
    1.3 Legal regulation of the activity of the retail organization.
    2. Evaluation of the effectiveness of retail trade in food products IP Parfenova T.Yu.
    2.1 Organizational and economic characteristics of the enterprise
    2.2 Analysis of the effectiveness of the organization
    2.3 Analysis of food retail performance indicators.
    3. Increasing the efficiency of the turnover of retail trade in food products IP Parfenova T.Yu.
    3.1 Measures aimed at improving the efficiency of retail trade in food products in IP Parfenova T.Yu
    3.2 Improving the legal regulation of activities
    organizations

    • Hello Oleg.
      If you have a regulatory improvement in chapter 3, then in chapter 2 you need a section that evaluates the regulatory framework for the work of a particular individual entrepreneur
      For example, like this:
      2.4 Assessment of the regulatory and legal conditions for the activities of IP Parfenova T.Yu.
      Chapter 3 - I think there are a lot of words in the title. Maybe like this: "Improving the efficiency of the retail turnover of food products IP Parfyonova T.Yu."?
      Item 3.1 can be simplified a bit:
      3.1 Measures to improve the efficiency of retail trade in food products IP Parfenova T.Yu.
      And paragraph 3.2 - to paraphrase a little, since it is unlikely that it will be possible to improve regulation - it is external.
      3.2 Improving the regulatory and legal aspects of the organization's activities

      • Thank you. And paragraphs 2.2 and 2.3 are not the same, are they too similar?

        You can rephrase 2.2 a bit.
        2.2. Comprehensive assessment of the organization's activities

1. Hello Christina. Write to me on vkontakte: vk.com/diplom35. I need to look at the manual. Well, you need to take into account that I am an economist, therefore, according to the plan of the diploma in jurisprudence, I can only suggest in general terms.
   Here, of course, it is more correct to find a teacher-lawyer.

This article contains an example of the structure of the final qualification work (thesis / project or bachelor's / master's thesis) - from introduction to applications.

Here you can download the final qualification work template itself:

By completing the sections of this sample template step by step, you will get the job you need. It will then only need to be issued according to the methodological instructions of your university.

For questions, you can go here: Alexander Krylov

So. Structure

TITLE PAGE OF THE FINAL QUALIFICATION WORK

This sheet is from guidelines for the implementation of WRC provided by the university

It is also necessary to look guidelines for the design of text documents, there are:

- Margin sizes (usually the same on all sides - for example, 2 cm each, and the right margin is almost always 1 cm)

- Font size 14, spacing 1.5, the font itself is Times New Roman

- Insert page numbers. Usually they are placed at the bottom in the center, there is no number on the title page

Press Enter before and after each heading so that there is one blank line between the heading and the text before and after it

Introduction ……………………………………………………………………………………

Chapter 1. Theoretical review on the topic of WRC ……………………………………………

1.1. Overview of the essence of the selected WRC topic …………………………………………

1.3. Industry-specific features of the WRC topic …………………………………………

Chapter 2. Analysis of the state and activities of the object (enterprise) in terms of the WRC topic in accordance with the methods from clause 1.2 ……………………………………………………

2.1. a brief description of and main indicators of the state and activity of the object ……………………………………………………………………………

2.2. Comprehensive economic or financial analysis of the facility’s activities ……………………………………………………………………………

2.3. Analysis on the topic of WRC ………………………………………………………………

Chapter 3. Designing measures to improve the activities of the facility in the direction chosen in the WRC ………………………………………………………………

3.1. Conditions and prerequisites for the development of events ………………………….

3.2. Name of event 1 …………………………………………………

3.3. Name of event 2 …………………………………………………

3.4. Name of event 3 ………………………………………………….

3.5. Evaluation of the effectiveness of a set of proposed measures ……………

Conclusion ……………………………………………………………………………………

List of used literature …………………………………………………………

Applications …………………………………………………………………………………

INTRODUCTION

Relevance. Why did you choose this topic? A couple of paragraphs, the total length is approximately 70% of the first page of the introduction

The purpose of the final qualifying work(read more about goals here:)

WRC tasks:

1. First task
2. Second task
3. Usually there are 5-7 pieces

Object of study in the WRC - the legal form and the name of the object of work. For example, Senior Lecturer Alexander Krylov LLC

Subject of study- what comes after the first word "improvement" or "improvement" from the WRC topic. If there is no such word in the title of the topic, then the subject of research is usually the first phrase.

For example, the topic “Improving the financial condition of an enterprise (on the example of Diplom 35 LLC)”

Then the subject of study in the WRC is the financial condition of the enterprise

Research methods- the methods that you used in the work. Personally, because I am a former senior lecturer in financial management, I write here all the time. financial ratio method. It is reasonable to fill out this paragraph after writing the entire work.

By the way. The financial ratios themselves, as well as financial analysis in general, can be calculated for free using this link: http://anfin.ru/finansovyj-analiz-esli-net-dannyh/.

Practical significance of WRC- not available in all jobs. Here we write what a theoretical review of the work can be used for, how you can use the results of the analysis, how realistic it is to use WRC events at the enterprise

Work structure- also not always there is this section. But if there is, then we write here: the final qualifying work consists of an introduction, main part, conclusion, list of sources used and literature and applications. The main part contains a theoretical overview that reveals the topic of the final qualification work, an analytical section that allows you to assess the current state of the object of study, a project part containing a list of measures to improve the subject of research with calculations confirming their economic feasibility

The size of the introduction is 3-5 pages, no more is required.

CHAPTER 1. THEORETICAL REVIEW ON WRC TOPIC

1.1. Overview of the essence of the selected WRC topic

1.2. Methods and approaches to measuring indicators characterizing the theme of the WRC

1.3. Industry specifics of the WRC theme

You can read an article on how to prepare the first part of the final qualification work here:. Where to get the theory - here:

CHAPTER 2. ANALYSIS OF THE STATE AND ACTIVITIES OF THE FACILITY (ENTERPRISE) FROM THE POINT OF VIEW OF THE TOPIC OF WRC IN ACCORDANCE WITH THE METHODS FROM P. 1.2

2.1. Brief description and main indicators of the state and activity of the facility

2.2. Comprehensive economic or financial analysis of the facility's activities

In this section, based on the initial data, a general analysis of the enterprise is carried out.

Regardless of the topic, the following types of analysis can be carried out:

2.3. Analysis on the subject of the WRC

This section provides a specific analysis for the topic of the work. You have to either invent it yourself, or look for a ready-made one and remake it to suit your theme of work.

CHAPTER 3

3.1. Conditions and prerequisites for the development of events

In this section, we write the conclusions on the analysis from the second chapter, since they are the conditions and prerequisites for the development of measures. Specifically, this section may be located at the end of the second part - there it will be called "Conclusions". Or it can be at the end of the second part, and at the beginning of the third. It depends on what your manager recommends.

You can read about the events for the third part here:. There are many activities, you can invent them yourself. In addition, they can be recommended by your supervisor or a representative of the object of work, that is, for example, the head of a department of an enterprise, who can subsequently write a review of your work ()

3.2. Name of event 1

Here you describe how to implement the first event, what resources are required for it, what are the deadlines for implementation, justify the costs and planned income, describe the possible effect

3.3. Name of event 2

Here you act similarly for the second event

3.4. Name of event 3

Well, here you describe the third event

3.5. Evaluation of the effectiveness of a set of proposed measures

Here you describe at least the following indicators - for all events at once:

- One-time costs

- fixed costs

- Variable costs

— Income

Based on these indicators, calculate the indicators economic efficiency. At least this:

— Profitability of a set of measures

— Change in the efficiency of the WRC facility as a result of the implementation of measures

- Payback period

At the end of this section, you draw conclusions about how the activities you proposed allowed you to achieve the goal of the final qualification work

CONCLUSION

In conclusion, you:

- Draw conclusions to achieve the goal

– Draw conclusions for all chapters, confirming them with figures from the analysis and project

— Describe options for using WRC results

— Describe options for further research for which your WRC can become the basis

LIST OF USED LITERATURE

This is insanity, of course, but often works are sent for rework if the list of more than 30 sources contains more than 5 sources released 5 years ago. It is somehow naive to think that the opinion of a dozen modern analysts who wrote their articles a year ago can even come close to the weight of the opinion of Henry Ford, who was the first to use the assembly line, Jack Trout, who invented the concept of product positioning, or Jack Welch, the legendary CEO of General Electric.

During the two decades of Jack Welch's rule, from 1981 to 2001, the total value of the corporation increased 30 times - from 14 to almost 400 billion dollars. General Electric became the second most profitable company in the world. After his departure from GE in 2001, Welch wrote an autobiography, JACK: Straight From The Gut, which became a bestseller.

And for using such a book and indicating the date of its publication, you can “wrap up” the work. Therefore, adjust the release dates of information sources.

APPS

APPENDIX A

In most economic works, Annex A will be the balance sheet of the object of study for three years.

APPENDIX B

APPENDIX B

The following applications will be located:

— Large illustrations (more than half a page in size)

- Large tables (more than 70% of the page)

All annexes should be mentioned in the text of the WRC.

All applications in the text of the work should be referenced.

The number of applications and their volume is usually not limited.

Materials for final qualifying (diploma, bachelor's, master's), term papers and practice reports in economics, financial management and analysis:

• The second chapter of the WRC on economics is usually called as part of the title of the thesis, but with the addition of the words "analysis, assessment, diagnostics", etc. to the beginning of the title. For example,…
• Good day, dear reader. In this article I will talk about how to write the introduction of a thesis. The introduction is written after drawing up the plan of the thesis. After writing the introduction...
• The third chapter of the thesis (bachelor's or specialist's) usually consists of three subsections. Its title is often similar to the title of the topic of the diploma and begins with words like ...
• There are several options for where to get the balance sheet and income statement for the thesis. Well, for any other economic work, too. If you…
• In order to evaluate the results of the implementation of measures in the third chapter of the diploma, it often makes sense to come up with a forecast balance sheet and a financial results report. What is this for…Good day to you. In this article, we will consider what to write in the conclusion of an economic work - a diploma, a dissertation or a regular term paper. The total volume of the conclusion is about ...
• Here you can read customer reviews about working with me, as well as see the cost of economic theses. Reviews first. Names, as you understand, cannot be given ...

Olga: I was asked to draw up an approximate plan for the diploma, I can’t do it myself. Provide an example of a dissertation plan.

Answer: The thesis plan is developed, as a rule, after the approval of the topic of your work by the supervisor.

Mandatory elements of the diploma plan are an introduction, 2-3 chapters with paragraphs (subparagraphs), a conclusion and a bibliographic list (list of references).

The introduction reveals: the relevance and degree of development of the topic, the subject, object, purpose and objectives of the study, the theoretical and practical significance of the work, methodological basis research and work structure.

In the first chapter of the thesis work on jurisprudence, as a rule, theoretical issues of the topic are considered. In this part of the plan, you can also reveal the historical aspects of the topic.

The second chapter is most often practical, it discusses current problems and suggests practical steps to resolve them, develops proposals for changing and improving legislation.

In conclusion, conclusions are drawn for chapters and paragraphs, as well as in summary the results of the study are summed up.

The plan of the thesis work on jurisprudence may also contain appendices. They usually add tables, diagrams or examples of contracts.

Some universities (for example, Moscow State Law Academy) require a list of abbreviations to be included in the final qualification work plan.

We also note that before drawing up a plan for a thesis, carefully read the training manual of your university, because. it usually tells you how to properly draw up a plan, and also gives the requirements of your university for writing theses.

A sample plan for a thesis in jurisprudence:

INTRODUCTION

CHAPTER 1. ARBITRATION JUDGERS AS PARTICIPANTS OF ARBITRATION PROCEEDINGS

1.1. Legal status of arbitrators

1.2. The influence of the institution of arbitration assessors on the development of arbitration courts in Russia

CHAPTER 2

2.1. Arbitrators and people's assessors

2.2. Arbitrators and jurors

CHAPTER 3

3.1. Analysis of modern problems of the institution of arbitration assessors in Russia

3.2. Foreign experience and ways of legislative improvement of the activities of arbitration assessors

CONCLUSION

LIST OF USED LITERATURE

LIST OF ABBREVIATIONS

APPS

As can be seen from the approximate plan of the graduation project, it reflects all the components, including the Applications and the List of Abbreviations. The first and second chapters in this regard are theoretical, and the third chapter is purely practical, where problems are identified and ways to solve them are developed.