Curtains

Tackle preparation: how to tie leashes to fishing line. How to properly tie a leash to the main line for different conditions

Today's topic of conversation is especially important for beginners, because not every young fisherman is familiar with how to tie a leash to the main line. And in general, the topic of special taps for various equipment in modern fishing is one of the most significant. From right choice and the installation of this element sometimes depends on the success of the trip to the reservoir, whether it is a trip for peaceful fish or a predator.

Types of leashes

According to their purpose and use in gear, fishing leashes are divided into several categories. It is according to this criterion that the type of knitting of the branch is carried out and what knot should be attached to the main fishing line.

On a predator

Depending on the type of fishing, one or another option is used. In the spinning direction, rigid leashes are used, made from a guitar string or wire from a field telephone cable.

Durable and durable leads are made of titanium wire.

In bait fishing, sheer baiting from a boat or ice, soft leashes are used to give the bait more freedom. Inserts of this type are made of the following materials:

  • kevlar;
  • tungsten braid;
  • forest twists;
  • from special leash material;
  • high diameter fluorocarbon.

In any case, you can correctly tie leashes to a predator in several ways:

  • loop to loop;
  • simple and double Palomar;
  • clinch;
  • another knot familiar to a particular angler.

Note! Palomar and double Palomar are recommended when tying leashes to a braided cord. Braid often has such a slippery surface that simple knots "float" when tightened.

Feeder and float

Feeder and float leashes, unlike products for a predator, anglers most often knit on their own. For this, a thin monofilament or a diameter suitable for the conditions of a particular fishing is taken and a hook corresponding to the intended bait. At one end of such an insert, a simple loop is made, at the other, in fact, the hook itself.

One option on how to knit leashes for fishing on a feeder and float is to use a swivel or carabiner on the upper end. This is important if the fitting plays the role of a support or if you need to quickly change the insert.


Federists at home make a large number of leashes with different parameters, store and transport them in special leashes.

carp fishing

In equipment for carp fishing, leashes are used with an additional eyelet for mounting a boilie on the hair.


Carp leashes are most often made of soft braid or a special material - leadcore.

Garlands and side inserts

Sometimes it is required to equip a float or feeder with an additional hook, a kind of side outlet from the main fishing line. The same type of installation is used in multi-hook garlands used in such types of gear as or bream ring. In these cases, leashes are often used, in which instead of a loop at the end there is a triple knot.

Attention! There is another option using two hooks in a rig, which will be discussed later in the "Double leader" chapter.

Spaced rigs

AT spinning fishing jig often uses the so-called spaced equipment, in which the bait and sinker are at some distance. These include:

  • Texas tooling;
  • caroline;
  • dropshot;
  • withdrawal leash.

Fluorocarbon leads are more commonly used in these rigs. A feature of this type of taps is the absence of a hook at one of the ends. Most often, such inserts are made with swivels and carabiners on both sides. This allows you to quickly change the equipment as a whole or a separate bait. An exception are leashes with tied offset hooks under.


Examples of spaced rigs with leads of different types.

Mounting methods and knots

Having considered the types of leashes, let's dwell on the types of their fastening, especially since they can be the same for different types of inserts.

The most popular variant of how to tie leashes to the main line is called a loop in a loop. Attached in this way different kinds fishing inserts in montages, both for peaceful and predatory fish.


The simplest connection of the two ends of the fishing line is a loop into a loop.

The procedure according to the diagram above:

  1. The loop of the leash is put on the loop of the main fishing line.
  2. Then the hook is passed through the base loop.
  3. The knot is pulled tight.

Knitted in the Palomar way, they hold up best, so we will briefly describe the order of knitting it.


Palomar is considered the best knot for braided lines. The scheme of his knitting.

  1. We fold the end of the fishing line in half and pass the loop through the eye of the hook or the loop of the swivel.
  2. Wrap the loop around the base.
  3. We throw a loop on the hook from above.
  4. We tighten the knot.

Advice! Do not forget to moisten the knot before final tightening to avoid overheating of the material from friction.

We will continue the description of fishing knots for leashes with a diagram of the clinch knot. This popular mounting method is performed in the following sequence:


The clinch works best on monofilament nylon or fluorocarbon line.

  1. We pass the end of the fishing line into the loop of the hook or swivel.
  2. We wrap the end several, 6-8 times around the base.
  3. We skip the tip first into the loop near the hook, then the loop formed during the knitting process.
  4. Wet, tighten, cut off the excess, leaving about half a centimeter.

When you need to attach a leash to the main fishing line so that it is located at 90 degrees, they act like this:

  1. On the main line we form a simple loop.
  2. We pass the end of another fishing line through it.
  3. We fold it in half loops.
  4. We wrap the loop with the free end 6-8 times.
  5. We skip the end into the original half-loop and tighten.


By tying two fishing lines in this way, we get an almost horizontal outlet.

For the manufacture of a garland in which several branches are used, the so-called "running" knot and leashes with a triple knot at the end are used.


Above - the main fishing line of the garland - below the leash insert.

As can be seen from the above diagram, first a running knot is prepared on the main line, which is tightened after placing a piece of another line in the lower loop. Attached in this way, the leash has some degree of freedom and can move through the loop.

This option is often used in float rods and very sharply in donks. Its peculiarity is that two leashes have a common loop for fastening. Knitting is done in this order:

  1. A piece of fishing line of 40-50 centimeters is taken.
  2. It folds in half so that the ends are of different lengths, for example 25 and 15 centimeters.
  3. Fits in.
  4. First, hooks are tied to one, and then to the second end.

Such a structure is attached to the snap-in using one of the methods described above.


For this design, it is better to use a rigid fluorocarbon fishing line.

Other designs

To describe the fastenings of leashes equipped with carabiners of need, it is clear to everyone that through these details the connection takes place. As for the swivels at the ends of the branches, any of the described nodes can be used here.

Conclusion

Knowledge of fishing knots will help the angler not only quickly tie the leash, but also the right way attach it to the rig. In the end, I would like to remind you that it is advisable to prepare a supply of various taps at home in advance, because every minute is precious when fishing.


Highly frequently asked question, which is often faced by insufficiently experienced anglers - how to tie a leash to your main line. This question is very important. Improper attachment of the leash can cause an unfortunate gathering of fish and you can only blame yourself for this. Some people run into this problem when they make their own rigging by attaching a hook to the float tackle or when they try to add another one to it. Why not, if the bite allows?

Others, when they buy ready-made rigs with multiple hooks, such as a "spring", and are faced with the problem of unreliable knots that unravel even with just a pull on it. Therefore, any tackle should always be checked, special attention should be paid to knots. But you need to be able to properly and securely tie leashes. There are special fishing knots for this.

I hope my video helped you learn how to tie leashes and you agree that this method is the best. Below I will give a few more ways to tie leashes and generally fishing knots, which I myself do not really like, but everyone is different and maybe someone will like them more, so look at the other options below and choose the best one for you.

How to tie a leash to the main fishing line method number 2

I am very glad if you were able to understand the pictures and you liked the knot. If you didn’t manage to make out the picture or you don’t like this knot, I can offer Alternative option knitting leashes. It is simpler, easier to learn to knit and just as reliable.

The third way to tie a leash to the main line

Video lesson knitting fishing knots

Very simple and clear. Reliable fishing knots visually. This video shows very high quality how to tie a leash to the main fishing line in various ways. Happy viewing.

Attaching a leader to your main line is easy with Rybkolov

So we figured out how to tie a leash to the main fishing line in several ways at once. These methods should be quite enough to securely fasten the leashes and so that your leash will never get untied at the most inopportune moment. If you learn how to properly tie the leash to the main line, then your trophy will no longer be able to leave you along with the leash. Good luck fishing! And by the way, do you think I was right - the first way is the best?

I look forward to your comments, and I also hope the article will also be useful to you.

Numerous options for fishing rigs, whether feeder or float, and even a simple donk, involve the use of separately connected fishing leashes with hooks in their installation.

In the standard (in most cases) version, a rig with a leash on which one hook is located is used. But sometimes, for a variety of baits simultaneously fed to the feed table, it becomes necessary to use a leash with two and sometimes more hooks.

How to tie such necessary leashes for fishing with your own hands, you can find in the article and the attached video below. . .

How to knit leashes with one and two hooks and how to connect the leash to the main fishing line

Many novice fishermen don't know how to make classic fishing leads that use a simple loop-to-loop connection. First, let's look at how to make a leash with one hook, and then we will analyze how to make leashes with two hooks.

Leash with one hook

To begin with, we need the hook itself and fishing line.

First, we unwind a little fishing line, and our task is to tie the end of the fishing line to the hook. We will bind with a standard knot. This knot is considered standard because it is used by the vast majority of fishermen. We take the end of the fishing line and thread it into the eye of the hook.


With reverse side we take it out a little and bend it. We get a loop.


Now we intercept this loop with our hand,


and with the other hand we wrap the working end of the fishing line 4-5 times around the forend of the hook.


After each turn of the fingers right hand we hold our winding.


After we have done 4 - 5 turns, we quickly intercept the winding with the other hand and we get a free end and our loop.


And this end is simply inserted into the loop.


Now we wet it all and at the same time tighten it at both ends. Then we pull the entire winding to the loop and tighten it well.


We cut off the excess end of the fishing line, and our hook is securely tied to the fishing line.


Knitting a loop on a leash with a figure-eight knot

Now we select the required length of the leash, we make a bend on the fishing line


and knit the loop with a figure-eight knot. We make such a loop


rotate 180 degrees


and in this loop we pass another loop. We get a knot in the form of a figure eight.


Wet, tighten and cut off the fishing line that comes from the reel. That's it, we have a leash with one hook ready.

Leash with two hooks and a loop at the end

Now we will knit a leash with two hooks.


In principle, this process is similar to the process of knitting leashes with one hook. First, we do the same thing - we unwind a little fishing line and tie the first hook to its end. We knit in exactly the same knot as the previous leash.

Now we measure the length of the leash we need. But here you need to take into account that a little fishing line will go to tying the second hook and, also, a little fishing line will go to the loop that will be between the hooks.

Therefore, we unwind the fishing line with a margin, bite off and tie a second hook to this end. We have a piece of fishing line with hooks at both ends. Next, we expose these hooks in such a way that one of them is higher than the other.


Because if they are on the same level, . On the bend of the fishing line we make a loop "eight". Wet and tighten. Pull up with one hook


and for the second hook.


One way to increase the catchability of gear is to tie additional hooks. This allows the simultaneous use of different baits and vegetable baits, which in turn increases the effectiveness of fishing. The main thing is not to overdo it and not violate the law, which allows amateur fishing with 10 hooks per angler. This means that more than 10 hooks cannot be in the water at the same time, regardless of the type of gear and their number. But within acceptable limits, additional leashes should be tied up to improve the bite.

A lot of reliable knots have been told and shown about how to tie a leash to the main fishing line, but most of them are not suitable for tying additional leashes with hooks.

The proposed method of tying additional side leashes is characterized by ease of execution, reliability and 100% solves the problem how to tie a second leash to the main line.

Starting to equip float rod, tackle "elastic band", etc., it is necessary to determine in advance the number and length of the leashes, as well as pre-mark the places of their attachment. For convenience, you need to leave a sufficient supply of fishing line, taking into account its shortening due to the formation of knots. The sequence of tying the leashes is carried out in the direction from the rod to the point of attachment of the sinker.

Method of tying side leashes

This method is good because it is great for connecting fishing lines of different diameters, and this is important when tying leashes, which are usually 10% thinner than the diameter. main line.

The sequence of tying additional side leashes:

In the chosen place of attachment of the leash on the main fishing line, a loop is formed, into which the free end of the fishing line is wound three times on one side (as when tying a triple knot);

The knot is pulled up to the formation of the "eight". This is determined visually;

The end of the leash is passed through both loops of the formed figure eight;

The leash is tied with any usual knot. For this purpose, the clinch knot is excellent - a reliable and easy-to-execute knot;

It remains to perform a thorough tightening of the "eight".

Before final tightening, the knots are wetted.

Using this method, you can easily tie the required number of additional side leashes. Tying a second leash shown in the video provided.

Video


Many beginner anglers wonder how to securely tie a leash to your main line at the time of assembly. This question arises not in vain, since the quality of all gear depends on it. A poorly tied leash can cause fish to leave, especially when biting a large specimen. Some fishermen attach not one, but several leashes, depending on the nature of the tackle, as well as the intensity of the bite. If the bite is excellent, then why not catch on two leashes with a hook.

Sometimes, when buying ready-made rigs, anglers are faced with the problem of low-quality knots connected on this rig, which requires ligation of such knots. As a rule, fishermen check any purchased rigging elements and either do not install suspicious ones at all, or bandage all nodal mounts. To do this, you need to have the skills to knit reliable knots, which are not so few.

The fact is that at the moment, there is a lot of information on how to securely tie a leash to the main fishing line, especially if you dig around on the Internet. If there are no knotting skills, then it is better to spend a little time and search the Internet for relevant articles or watch a suitable video. As a rule, everyone who shares such information believes that their method is the best, easiest and most reliable. In this case, it is better to experiment and choose for yourself the most reliable one.

The pictures below show in detail how to do this. Looking at these pictures, you can try to tie the leash yourself. If you don’t like the method or don’t succeed, then you can get acquainted with an alternative method that is easier to knit, but no less reliable.

Binding method No. 3

Video lesson on knitting fishing knots

Here you can very simply and clearly master the knitting of fishing knots, and most importantly, that everything is clear and accessible. Here, too, you can see how to quickly and securely tie the leash to the main line.

Easy to tie the leash to the main line

These are not the only ways to securely tie knots if you want to tie a leash to your main line. The fisherman has the right to choose for himself those nodes that he considers the fastest and most reliable. For a real fisherman, it is very important that the knot is knitted quickly, without any problems, since there is always not enough time for fishing. Although very often upset moments when, after biting a good specimen, the leash is untied and the fish leaves. Therefore, nodes must be reliable. An important role in knitting knots is played by the practice of knitting such knots, and practical skills come only after everyday training. Therefore, going fishing, you should practice a little in a relaxed home environment. Otherwise, when fishing, during a good bite, when there is so little time, it will be very difficult to tie even the simplest knot, and then all the fishing will leave no good memories, but, in fact, it is not fishing that is to blame, but the fisherman, who did not take this process seriously.

Fishing- this is a very interesting activity that contributes to general relaxation, as well as the activation of many organs, since fishing is carried out in the fresh air, near a reservoir, and also away from the everyday fuss that contributes to the accumulation negative emotions. While fishing, a person forgets about his problems, which leads to the removal of stress loads and strengthens the psychophysical state of the body. And this, excuse me, is nothing but health.